Installation

A Versatile Installation System

Quad Blok Connector System exclusive to PlayGuard

PlayGuard can be installed using a variety of installation methods. The most common and secure method is full adhesion of tiles and accessories to the substrates using E-Grip III™, an easy-to-use one part polyurethane adhesive. E-Grip III's coverage is approximately 60 sq/ft on concrete, 50 sq/ft on asphalt, and 45 sq/ft on protective fabric (1/8" square notched trowel) and is available in 2 or 4 gallon pails.

For rooftop and specialty applications, we recommend our exclusive fastening system called Quad Blok™. It offers added stability and ease of installation and maintenance. Tiles are adhered to the Quad Blok connector eliminating any potential damage to the roof membrane. Replacing individual tiles and securing a strong, tight-fitting system is a snap with Quad Blok.

Installation using our Quad Blok system is recommended only for 2 ½" PlayGuard tiles. Additionally, it uses E-Grip III in 10.1 oz. tubes, at a rate of one tube per ten Quad Blok connectors with a 3/8" bead

For more detailed installation instructions, please refer to the PlayGuard installation and maintenance manual.